문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
YOKOGAWA 요꼬가와 FG400 | 펑션제너레이터
AQ6150
AQ6150B
AQ6151B
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
YOKOGAWA FG400 제품 데이터시트의 핵심 사양입니다.
- 0.01 μHz to 30 MHz ±10 V/open Frequency sweep Auto
- Frequency 1 kHz 1 kHz 1 kHz —
- Input/output terminal and Specification of FG400 FFGG440000 Series
- 1 Waveform output 5 External 10 MHz frequency reference input 10 Waveform output
- 2 Sync/sub-output 6 Frequency reference output 11 Sync/sub-output
- Number of channels FG410: 1 channel FG420: 2 channels Internal modulation signal: −3 V to +3 V/open
- Output waveforms Sine, square, pulse, ramp, parameter-variable waveform, Sweep X drive: 0 V to +3 V/open
- Amplitude frequency 100 kHz or lower: ±0.1 dB
- Frequency characteristics*1 100 kHz to 5 MHz: ±0.15 dB
- Continuous, modulation, Sweep (50 mVp-p to 10 Vp-p/50 Ω, reference frequency 1 kHz)
- Noise Fixed to 26 MHz equivalent bandwidth 10 MHz to 30 MHz −45 dBc or lower
- range Jitter: 2.5 ns rms or less typ.
- Output Characteristics Rising/falling time*1 17 ns or less
- Accuracy*1 *4 ±(1% of amplitude setting [Vp-p] + 2 mVp-p)/open Time setting range: 25.50 ns to 99.9830 Ms
- DC offset Setting range ±10 V/open, ±5 V/50 Ω Overshoot 5% or less typ.
- Output impedance 50 Ω, unbalanced
- 7 Amplitude resolution 16 bits External addition input Function to add the external signal to the waveform output signal.
- Sampling rate 120 MS/s Addition gain ×2/×10/off selectable
- Type FM Carrier waveform: Standard waveform other than noise, pulse wave and DC, and Voltage/waveform −1 V to +1 V, DC to 10 MHz (−3 dB)
- arbitrary waveform Input impedance 10 kΩ, unbalanced
- 10 MHz frequency reference input.
- Internal modulation Other than FSK, PSK: 0.1 mHz to 100 kHz (5 digits or 0.1 mHz) Power supply AC 100 V to 230 V ±10% (250 V max.)
- Sweep Power consumption FG410 50 VA or less
- Operating temperature/ 0ºC to +40ºC, 5%RH to 85%RH
- Weight Approx. 2.1 kg (main unit excluding accessories)
- Input impedance 10 kΩ (pulled up to +3.3 V), unbalanced Device control function • Major parameter setting
- FG410 Arbitrary/Function Generator: 1-Channel, 30 MHz
- FG420 Arbitrary/Function Generator: 2-Channel, 30 MHz ScopeCorder
- Standard Accessories; • High-speed (up to 100 MS/s),
- Unit: mm • 350 MHz, 500 MHz analog bandwidth
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
YOKOGAWA 요꼬가와 FG400 | 펑션제너레이터
AQ6150
AQ6150B
AQ6151B
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
YOKOGAWA FG400 제품 데이터시트의 핵심 사양입니다.
- 0.01 μHz to 30 MHz ±10 V/open Frequency sweep Auto
- Frequency 1 kHz 1 kHz 1 kHz —
- Input/output terminal and Specification of FG400 FFGG440000 Series
- 1 Waveform output 5 External 10 MHz frequency reference input 10 Waveform output
- 2 Sync/sub-output 6 Frequency reference output 11 Sync/sub-output
- Number of channels FG410: 1 channel FG420: 2 channels Internal modulation signal: −3 V to +3 V/open
- Output waveforms Sine, square, pulse, ramp, parameter-variable waveform, Sweep X drive: 0 V to +3 V/open
- Amplitude frequency 100 kHz or lower: ±0.1 dB
- Frequency characteristics*1 100 kHz to 5 MHz: ±0.15 dB
- Continuous, modulation, Sweep (50 mVp-p to 10 Vp-p/50 Ω, reference frequency 1 kHz)
- Noise Fixed to 26 MHz equivalent bandwidth 10 MHz to 30 MHz −45 dBc or lower
- range Jitter: 2.5 ns rms or less typ.
- Output Characteristics Rising/falling time*1 17 ns or less
- Accuracy*1 *4 ±(1% of amplitude setting [Vp-p] + 2 mVp-p)/open Time setting range: 25.50 ns to 99.9830 Ms
- DC offset Setting range ±10 V/open, ±5 V/50 Ω Overshoot 5% or less typ.
- Output impedance 50 Ω, unbalanced
- 7 Amplitude resolution 16 bits External addition input Function to add the external signal to the waveform output signal.
- Sampling rate 120 MS/s Addition gain ×2/×10/off selectable
- Type FM Carrier waveform: Standard waveform other than noise, pulse wave and DC, and Voltage/waveform −1 V to +1 V, DC to 10 MHz (−3 dB)
- arbitrary waveform Input impedance 10 kΩ, unbalanced
- 10 MHz frequency reference input.
- Internal modulation Other than FSK, PSK: 0.1 mHz to 100 kHz (5 digits or 0.1 mHz) Power supply AC 100 V to 230 V ±10% (250 V max.)
- Sweep Power consumption FG410 50 VA or less
- Operating temperature/ 0ºC to +40ºC, 5%RH to 85%RH
- Weight Approx. 2.1 kg (main unit excluding accessories)
- Input impedance 10 kΩ (pulled up to +3.3 V), unbalanced Device control function • Major parameter setting
- FG410 Arbitrary/Function Generator: 1-Channel, 30 MHz
- FG420 Arbitrary/Function Generator: 2-Channel, 30 MHz ScopeCorder
- Standard Accessories; • High-speed (up to 100 MS/s),
- Unit: mm • 350 MHz, 500 MHz analog bandwidth
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
