문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
키사이트 ・ KEYSIGHT
M981xAS 시리즈
PXI 벡터 컴포넌트 분석기
M981xAS Series PXI Vector Component Analyzer
HIGHLIGHTS
- Frequency range of 100 kHz to 32 GHz
- Full component characterization with advanced network analysis measurements and modulated signal measurements when paired with a vector signal generator
- Multiport architecture provides fast measurements on highly integrated T/R modules and beamformer ICs
- Modular system scales with your measurement needs, buy as many ports as you need and upgrade at any timeFast measurement speeds for high throughput
What's included:
- M9806A PXI VNA
- M9816A Receiver Module(s)
- Interconnect cables
- Quick start guide
M9816AS M9816AS KEYSIGHT KEYSIGHT M9816AS M9816AS키사이트 키사이트 M9816AS
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
KEYSIGHT M981xAS 제품 데이터시트의 핵심 사양입니다.
- What if you combine all your measurements into a single instrument? The M981xAS PXIe Vector
- environmental conditions. All specifications and characteristics apply over a 25 °C ± 5 °C range (unless
- • Module temperature is between 37 to 50 °C (M980xA PXI VNA and M981xA receiver module).
- • Instrument remains at a stable surrounding environment temperature (between -10 °C to 55 °C) for
- Expected performance of an average unit at a stable temperature between 25°C ± 5°C for 60 minutes
- 1. For all tables in this data sheet, the specified performance at the exact frequency of a break is the better value of the two
- 1. Noise floor in a 10 Hz IF Bandwidth. Measured with 1 kHz IF bandwidth for 30 kHz IF bandwidth for 100 kHz to 53 GHz. Test
- Table 5. Damage Input Level
- Damage Input Level +27 dBm or ± 35 VDC (Warranted)
- Accuracy of the test port input power relative to the reference input power level. Measured with 10 Hz IF
- Dynamic accuracy 1 – specification
- 1. Dynamic accuracy is verified with the following measurements:
- - IF linearity using a reference level of -20 dBm for an input power range of 0 to -60 dBm. Tested at three single
- frequencies (30.6 MHz, 49.6 MHz and 99.6 MHz) to cover the whole frequency range. The VNA receiver is linear by
- design when signal levels are below -60 dBm. For more details, refer to VNA Receiver Dynamic Accuracy Specifications
- Table 6. Frequency Specifications
- Frequency Reference 1
- Temperature stability - ± 7 ppm (0 to 50 °C)
- - reference accuracy) + (< 1% x RBW)],
- Resolution 1 Hz -
- Sweep (Trace) point range 11 to 100,001 -
- Range (-3 dB bandwidth) -
- Range 10 Hz to 3 MHz -
- 1. Frequency reference accuracy can be improved by using external frequency reference with better accuracy.
- Trigger delay range 0 to 3 s -
- Trigger delay resolution 1 µs -
- Measuring and Display Update Rate (milliseconds) 1
- Table 8. Amplitude Accuracy and Range Specifications
- Maximum safe input level +27 dBm
- Table 9. SA Detector Accuracy (dB) 1 – Specifications
- 1. With high attenuation. SA detector accuracy is residual error of IF response calibration. IF response is characterized with
- M981xAS’s standard measurement class after power and S-parameter calibration. Therefore, the SA total absolute
- Table 10. Input Attenuation Switching Uncertainty (dB) – Supplemental Information
- Table 11. Input VSWR 1 – Specifications
- 1. Calculated by input return loss of uncorrected error terms (Table 1). 𝑉𝑆𝑊𝑅= 1+10(−1 ∗ 𝑖𝑛𝑝𝑢𝑡 𝑟𝑒𝑡𝑢𝑟𝑛 𝑙𝑜𝑠𝑠/20)
- Table 12. Other Amplitude Accuracy – Supplemental Information
- measurement class with user calibration between -10 dBm and -
- 40 dBm input power and measurement between +10 dBm and -
- 120 dBm input power.
- Table 14. Displayed Average Noise Level (DANL) at Test Ports with Low Attenuation (dBm/Hz) 1 –
- Table 15. Displayed Average Noise Level (DANL) at Test Ports with High Attenuation (dBm/Hz) 1 –
- 1. Tested with 0 dBm for 50 MHz to 10 GHz, and -5 dBm for 10 GHz to 26.5 GHz input at test port, 10 MHz tone separations.
- 1. Tested with -25 dBm input at test port, 10 MHz tone separations.
- 40 GHz to 53 GHz input at test port, 10 MHz tone separations.
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
M981xAS 정보 정리
제품 개요
KEYSIGHT M981xAS은(는) 네트워크·케이블 시험기 항목으로 분류된 제품입니다. 상품 등록명은 “KEYSIGHT 키사이트 M981xAS 시리즈 PXI 벡터 컴포넌트 분석기”입니다. 상품 원문에는 Full component characterization with advanced network analysis measurements and modulated signal measurements when paired with a vector signal generator 내용이 기재되어 있습니다. 등록 카테고리는 네트워크입니다.
주요 사양
제조사 자료 기준으로 상품 원문에 기재된 사양입니다. 실제 적용 조건과 대조해 확인해 주세요.
- Frequency range of 100 kHz to 32 GHz
- M9806A PXI VNA
- M9816A Receiver Module(s)
- M9816AS M9816AS KEYSIGHT KEYSIGHT M9816AS M9816AS키사이트 키사이트 M9816AS
- environmental conditions. All specifications and characteristics apply over a 25 °C ± 5 °C range (unless
- Module temperature is between 37 to 50 °C (M980xA PXI VNA and M981xA receiver module).
- Instrument remains at a stable surrounding environment temperature (between -10 °C to 55 °C) for
- Expected performance of an average unit at a stable temperature between 25°C ± 5°C for 60 minutes
- 1. Noise floor in a 10 Hz IF Bandwidth. Measured with 1 kHz IF bandwidth for 30 kHz IF bandwidth for 100 kHz to 53 GHz. Test
- Damage Input Level +27 dBm or ± 35 VDC (Warranted)
추천 사용 환경
상품 원문에 기재된 사용·적용 관련 내용입니다.
- Multiport architecture provides fast measurements on highly integrated T/R modules and beamformer ICs
- Modular system scales with your measurement needs, buy as many ports as you need and upgrade at any timeFast measurement speeds for high throughput
- What if you combine all your measurements into a single instrument? The M981xAS PXIe Vector
- 1. Dynamic accuracy is verified with the following measurements:
- 본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다.
구매 전 확인사항
주문 전에 아래 항목을 확인해 주세요.
- 측정 범위 — IF linearity using a reference level of -20 dBm for an input power range of 0 to -60 dBm. Tested at three single
- 정확도 — Accuracy of the test port input power relative to the reference input power level. Measured with 10 Hz IF
- 전원 — 40 dBm input power and measurement between +10 dBm and -
- 정확한 모델과 옵션 구성을 확인해 주세요.
- 실제 제공 사양과 구성품은 선택 모델에 따라 달라질 수 있으므로 주문 전에 확인해 주세요.
자주 받는 문의
KEYSIGHT M981xAS 사양은 어디까지 확인되나요?
원문 기준으로 frequencies (30.6 MHz, 49.6 MHz and 99.6 MHz) to cover the whole frequency range. 항목이 확인됩니다. 나머지 값은 선택 모델에 따라 달라질 수 있습니다.
KEYSIGHT M981xAS은(는) 어떤 작업에 사용하나요?
원문에는 M981xAS’s standard measurement class after power and S-parameter calibration. 내용이 기재되어 있습니다.
KEYSIGHT M981xAS 구성과 견적은 어떻게 확인하나요?
정확한 모델·옵션 구성은 굿맨시스템으로 문의해 주세요. 선택 모델에 따라 제공 구성이 달라질 수 있습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
키사이트 ・ KEYSIGHT
M981xAS 시리즈
PXI 벡터 컴포넌트 분석기
M981xAS Series PXI Vector Component Analyzer
HIGHLIGHTS
- Frequency range of 100 kHz to 32 GHz
- Full component characterization with advanced network analysis measurements and modulated signal measurements when paired with a vector signal generator
- Multiport architecture provides fast measurements on highly integrated T/R modules and beamformer ICs
- Modular system scales with your measurement needs, buy as many ports as you need and upgrade at any timeFast measurement speeds for high throughput
What's included:
- M9806A PXI VNA
- M9816A Receiver Module(s)
- Interconnect cables
- Quick start guide
M9816AS M9816AS KEYSIGHT KEYSIGHT M9816AS M9816AS키사이트 키사이트 M9816AS
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
KEYSIGHT M981xAS 제품 데이터시트의 핵심 사양입니다.
- What if you combine all your measurements into a single instrument? The M981xAS PXIe Vector
- environmental conditions. All specifications and characteristics apply over a 25 °C ± 5 °C range (unless
- • Module temperature is between 37 to 50 °C (M980xA PXI VNA and M981xA receiver module).
- • Instrument remains at a stable surrounding environment temperature (between -10 °C to 55 °C) for
- Expected performance of an average unit at a stable temperature between 25°C ± 5°C for 60 minutes
- 1. For all tables in this data sheet, the specified performance at the exact frequency of a break is the better value of the two
- 1. Noise floor in a 10 Hz IF Bandwidth. Measured with 1 kHz IF bandwidth for 30 kHz IF bandwidth for 100 kHz to 53 GHz. Test
- Table 5. Damage Input Level
- Damage Input Level +27 dBm or ± 35 VDC (Warranted)
- Accuracy of the test port input power relative to the reference input power level. Measured with 10 Hz IF
- Dynamic accuracy 1 – specification
- 1. Dynamic accuracy is verified with the following measurements:
- - IF linearity using a reference level of -20 dBm for an input power range of 0 to -60 dBm. Tested at three single
- frequencies (30.6 MHz, 49.6 MHz and 99.6 MHz) to cover the whole frequency range. The VNA receiver is linear by
- design when signal levels are below -60 dBm. For more details, refer to VNA Receiver Dynamic Accuracy Specifications
- Table 6. Frequency Specifications
- Frequency Reference 1
- Temperature stability - ± 7 ppm (0 to 50 °C)
- - reference accuracy) + (< 1% x RBW)],
- Resolution 1 Hz -
- Sweep (Trace) point range 11 to 100,001 -
- Range (-3 dB bandwidth) -
- Range 10 Hz to 3 MHz -
- 1. Frequency reference accuracy can be improved by using external frequency reference with better accuracy.
- Trigger delay range 0 to 3 s -
- Trigger delay resolution 1 µs -
- Measuring and Display Update Rate (milliseconds) 1
- Table 8. Amplitude Accuracy and Range Specifications
- Maximum safe input level +27 dBm
- Table 9. SA Detector Accuracy (dB) 1 – Specifications
- 1. With high attenuation. SA detector accuracy is residual error of IF response calibration. IF response is characterized with
- M981xAS’s standard measurement class after power and S-parameter calibration. Therefore, the SA total absolute
- Table 10. Input Attenuation Switching Uncertainty (dB) – Supplemental Information
- Table 11. Input VSWR 1 – Specifications
- 1. Calculated by input return loss of uncorrected error terms (Table 1). 𝑉𝑆𝑊𝑅= 1+10(−1 ∗ 𝑖𝑛𝑝𝑢𝑡 𝑟𝑒𝑡𝑢𝑟𝑛 𝑙𝑜𝑠𝑠/20)
- Table 12. Other Amplitude Accuracy – Supplemental Information
- measurement class with user calibration between -10 dBm and -
- 40 dBm input power and measurement between +10 dBm and -
- 120 dBm input power.
- Table 14. Displayed Average Noise Level (DANL) at Test Ports with Low Attenuation (dBm/Hz) 1 –
- Table 15. Displayed Average Noise Level (DANL) at Test Ports with High Attenuation (dBm/Hz) 1 –
- 1. Tested with 0 dBm for 50 MHz to 10 GHz, and -5 dBm for 10 GHz to 26.5 GHz input at test port, 10 MHz tone separations.
- 1. Tested with -25 dBm input at test port, 10 MHz tone separations.
- 40 GHz to 53 GHz input at test port, 10 MHz tone separations.
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
M981xAS 정보 정리
제품 개요
KEYSIGHT M981xAS은(는) 네트워크·케이블 시험기 항목으로 분류된 제품입니다. 상품 등록명은 “KEYSIGHT 키사이트 M981xAS 시리즈 PXI 벡터 컴포넌트 분석기”입니다. 상품 원문에는 Full component characterization with advanced network analysis measurements and modulated signal measurements when paired with a vector signal generator 내용이 기재되어 있습니다. 등록 카테고리는 네트워크입니다.
주요 사양
제조사 자료 기준으로 상품 원문에 기재된 사양입니다. 실제 적용 조건과 대조해 확인해 주세요.
- Frequency range of 100 kHz to 32 GHz
- M9806A PXI VNA
- M9816A Receiver Module(s)
- M9816AS M9816AS KEYSIGHT KEYSIGHT M9816AS M9816AS키사이트 키사이트 M9816AS
- environmental conditions. All specifications and characteristics apply over a 25 °C ± 5 °C range (unless
- Module temperature is between 37 to 50 °C (M980xA PXI VNA and M981xA receiver module).
- Instrument remains at a stable surrounding environment temperature (between -10 °C to 55 °C) for
- Expected performance of an average unit at a stable temperature between 25°C ± 5°C for 60 minutes
- 1. Noise floor in a 10 Hz IF Bandwidth. Measured with 1 kHz IF bandwidth for 30 kHz IF bandwidth for 100 kHz to 53 GHz. Test
- Damage Input Level +27 dBm or ± 35 VDC (Warranted)
추천 사용 환경
상품 원문에 기재된 사용·적용 관련 내용입니다.
- Multiport architecture provides fast measurements on highly integrated T/R modules and beamformer ICs
- Modular system scales with your measurement needs, buy as many ports as you need and upgrade at any timeFast measurement speeds for high throughput
- What if you combine all your measurements into a single instrument? The M981xAS PXIe Vector
- 1. Dynamic accuracy is verified with the following measurements:
- 본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다.
구매 전 확인사항
주문 전에 아래 항목을 확인해 주세요.
- 측정 범위 — IF linearity using a reference level of -20 dBm for an input power range of 0 to -60 dBm. Tested at three single
- 정확도 — Accuracy of the test port input power relative to the reference input power level. Measured with 10 Hz IF
- 전원 — 40 dBm input power and measurement between +10 dBm and -
- 정확한 모델과 옵션 구성을 확인해 주세요.
- 실제 제공 사양과 구성품은 선택 모델에 따라 달라질 수 있으므로 주문 전에 확인해 주세요.
자주 받는 문의
KEYSIGHT M981xAS 사양은 어디까지 확인되나요?
원문 기준으로 frequencies (30.6 MHz, 49.6 MHz and 99.6 MHz) to cover the whole frequency range. 항목이 확인됩니다. 나머지 값은 선택 모델에 따라 달라질 수 있습니다.
KEYSIGHT M981xAS은(는) 어떤 작업에 사용하나요?
원문에는 M981xAS’s standard measurement class after power and S-parameter calibration. 내용이 기재되어 있습니다.
KEYSIGHT M981xAS 구성과 견적은 어떻게 확인하나요?
정확한 모델·옵션 구성은 굿맨시스템으로 문의해 주세요. 선택 모델에 따라 제공 구성이 달라질 수 있습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
