르크로이 LECROY DL-ISO&HVFO 고전압광학절연프로브 (가격문의) DL- ISO-1000V-TIP – DL-ISO-2500V-TIP HVFO108 HVFO100-1X-TIP-U HVFO100-5X-TIP-U
111,111원
LECROY DL-ISO & HVFO 고전압 광학 절연 프로브
LECROY DL-ISO & HVFO High Voltage Optically Isolated Probes
DL03-ISO DL07-ISO DL10-ISO SL-ISO-ACC-KIT
DL-ISO-2V-TIP DL-ISO-10V-TIP DL-ISO-40V-TIP
DL-ISO-200V-TIP DL-ISO-1000V-TIP DL-ISO-2500V-TIP
HVFO108 HVFO100-1X-TIP-U HVFO100-5X-TIP-U
HVFO100-10X-TIP-U HVFO100-20X-TIP-U HVFO100-40X-TIP-U
고전압 광학 절연 프로브는 전력 반도체 디바이스 특성화 측정을 지원하도록 설계되었습니다. HV Bus에 있는 저전압 신호든 고전압 신호든, 고대역폭, 극도의 정밀도 및 광학적 절연은 최소한의 DUT 부하로 플로팅 측정을 쉽게 수행할 수 있음을 의미합니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
르크로이 LECROY
DL-ISO & HVFO
고전압 광학 절연 프로브
DL-ISO & HVFO High Voltage Optically Isolated Probes
DL03-ISO
DL07-ISO
DL10-ISO
SL-ISO-ACC-KIT
DL-ISO-2V-TIP
DL-ISO-10V-TIP
DL-ISO-40V-TIP
DL-ISO-200V-TIP
DL-ISO-1000V-TIP
DL-ISO-2500V-TIP
HVFO108
HVFO100-1X-TIP-U
HVFO100-5X-TIP-U
HVFO100-10X-TIP-U
HVFO100-20X-TIP-U
HVFO100-40X-TIP-U
- GaN 및 SiC 디바이스에 이상적
- 최고의 시스템 정확도
- 가장 빠른 상승 시간
- 높은 CMRR - 160dB
■ 제품 사양 (Specifications)
르크로이 제품 데이터시트의 핵심 사양입니다.
- The HVFO108 probe is a high-voltage, fiber-optically isolated Optional Accessories
- teledynelecroy.com/probes/high-voltage-fiber-optically-isolated-probes HVFO100-5X-TIP-U
- High-Voltage Fiber Optic Probe (5 V maximum non-destruct)
- transmits signal and data across a fiber optic cable. ~6 hours
- connector. HVFO100-40X-TIP-U ±40 V (DC + Peak AC)
- 2. C onnect the fiber optic cable to the receiver and CHnHVFO108 Probe dialog is displayed behind the channel
- 1. C onnect the blue Signal lead to voltage (Vs).
- Tip lead sockets fit well onto 22AWG wires or 0.100” Ambient temperature during charging should be 0° to 40° C.
- pitch pin headers. Micro-grippers provide two CAUTION: Recharge temperature range is lower than LED 1 Indicates
- These symbols appear on the probe or in documentation. Bandwidth 150 MHz typical Clean only the exterior surfaces of the probe using a soft
- 1x tip ± 1 V
- 5x tip ± 5 V
- 10x tip ± 10 V
- 20x tip ± 20 V
- manual to protect against personal injury or 40x tip ± 40 V
- fully understood and met. Max. Common Mode Voltage ± 35 kV (DC + peak AC) Clean fiber optic ports with low pressure dry air.
- Discharge (ESD) that can damage equipment Max. Input Voltage to Earth ± 35 kV (DC + peak AC) CAUTION: Do not apply solvent to the ports or
- Laser Safety WARNING. Max. Safe Input Voltage 30 VRMS / 60 VDC (hand-held)
- Max. Non-destruct Voltage Lower of 5X dynamic range or 100 V
- The terms isolated and electrically floating are used in Temperature, Operating 10 °C - 40 °C
- Temperature, Storage 20 °C - 70 °C
- Compliance Relative Humidity, Operating 5% - 80% RH (non-condensing) to 30 °C
- Relative Humidity, Storage 5% - 95% RH (non-condensing)
- IEC/EN 61010-1:2010 - Safety Requirements for Electrical
- IEC/EN 60825–1 - Safety of Laser Products
- Part 1: Equipment Classification and Requirements - Altitude, Storage 10,000 m (32,807 ft.) maximum Ph: 800-553-2769 / 845-425-2000
- The overall safety of any system incorporating this Not rated for hand-held use above 60 Vdc/30 Vrms. The unique common mode voltage range of the probe
- Do not connect tip leads to an energized circuit. using the HVFO108. The plastic case of the probe
- Keep the probe body and output cable away from the CLASS 1M LA SER PRODUCT
- WARNING: The HVFO108 probe contains laser Maximum safe handling limits for common mode voltages
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
르크로이 LECROY
DL-ISO & HVFO
고전압 광학 절연 프로브
DL-ISO & HVFO High Voltage Optically Isolated Probes
DL03-ISO
DL07-ISO
DL10-ISO
SL-ISO-ACC-KIT
DL-ISO-2V-TIP
DL-ISO-10V-TIP
DL-ISO-40V-TIP
DL-ISO-200V-TIP
DL-ISO-1000V-TIP
DL-ISO-2500V-TIP
HVFO108
HVFO100-1X-TIP-U
HVFO100-5X-TIP-U
HVFO100-10X-TIP-U
HVFO100-20X-TIP-U
HVFO100-40X-TIP-U
- GaN 및 SiC 디바이스에 이상적
- 최고의 시스템 정확도
- 가장 빠른 상승 시간
- 높은 CMRR - 160dB
■ 제품 사양 (Specifications)
르크로이 제품 데이터시트의 핵심 사양입니다.
- The HVFO108 probe is a high-voltage, fiber-optically isolated Optional Accessories
- teledynelecroy.com/probes/high-voltage-fiber-optically-isolated-probes HVFO100-5X-TIP-U
- High-Voltage Fiber Optic Probe (5 V maximum non-destruct)
- transmits signal and data across a fiber optic cable. ~6 hours
- connector. HVFO100-40X-TIP-U ±40 V (DC + Peak AC)
- 2. C onnect the fiber optic cable to the receiver and CHnHVFO108 Probe dialog is displayed behind the channel
- 1. C onnect the blue Signal lead to voltage (Vs).
- Tip lead sockets fit well onto 22AWG wires or 0.100” Ambient temperature during charging should be 0° to 40° C.
- pitch pin headers. Micro-grippers provide two CAUTION: Recharge temperature range is lower than LED 1 Indicates
- These symbols appear on the probe or in documentation. Bandwidth 150 MHz typical Clean only the exterior surfaces of the probe using a soft
- 1x tip ± 1 V
- 5x tip ± 5 V
- 10x tip ± 10 V
- 20x tip ± 20 V
- manual to protect against personal injury or 40x tip ± 40 V
- fully understood and met. Max. Common Mode Voltage ± 35 kV (DC + peak AC) Clean fiber optic ports with low pressure dry air.
- Discharge (ESD) that can damage equipment Max. Input Voltage to Earth ± 35 kV (DC + peak AC) CAUTION: Do not apply solvent to the ports or
- Laser Safety WARNING. Max. Safe Input Voltage 30 VRMS / 60 VDC (hand-held)
- Max. Non-destruct Voltage Lower of 5X dynamic range or 100 V
- The terms isolated and electrically floating are used in Temperature, Operating 10 °C - 40 °C
- Temperature, Storage 20 °C - 70 °C
- Compliance Relative Humidity, Operating 5% - 80% RH (non-condensing) to 30 °C
- Relative Humidity, Storage 5% - 95% RH (non-condensing)
- IEC/EN 61010-1:2010 - Safety Requirements for Electrical
- IEC/EN 60825–1 - Safety of Laser Products
- Part 1: Equipment Classification and Requirements - Altitude, Storage 10,000 m (32,807 ft.) maximum Ph: 800-553-2769 / 845-425-2000
- The overall safety of any system incorporating this Not rated for hand-held use above 60 Vdc/30 Vrms. The unique common mode voltage range of the probe
- Do not connect tip leads to an energized circuit. using the HVFO108. The plastic case of the probe
- Keep the probe body and output cable away from the CLASS 1M LA SER PRODUCT
- WARNING: The HVFO108 probe contains laser Maximum safe handling limits for common mode voltages
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
