문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
2709B
디지털 멀티미터
2709B Auto Ranging True RMS Tool Kit® DMM
2709B 2709B BK BK 2709B 2709B B&K B&K 2709B 2709B 비케이 비케이 2709B 2709B 비앤케이 비앤케이 2709B 2709B비엔케이 비엔케이 2709B
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 2709B 제품 데이터시트의 핵심 사양입니다.
- Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 6600. Test current: 1.2mA (approximate) Continuity Measurements
- Measurement rate: 2 times per second, nominal.
- Auto power off: Approx. 30 minutes. CONTINUITY Capacitance Measurements
- Operating environment: 0℃ to 50℃ at < 70% relative humidity. Audible indication: Less than 30Ω 1. Set the Function/Range switch to the desired capacitance range.
- Storage temperature: -20℃ to 60℃, 0 to 80% relative humidity. Response time: 100ms 2.Connect the red test lead to the “uA mA” jack and the black test lead to the
- Accuracy: Stated accuracy at 23℃ ±5℃, < 75% relative humidity. Overload protection: 500VDC or AC rms “COM “jack.
- Temperature Coefficient: 0.1 x (specified accuracy) per ℃. (℃ to 18℃, 28℃ to 3.Touch the probes to the capacitor. Observe polarity when measuring polarized
- Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
- Dimensions: 165mm (H) x78mm (W) x42.5mm (D).
- Weight: Approx. 10.0 oz. (285g) including holster.
- Ranges: 660mV, 6.6V, 66V, 660V, 1000V MAX / MIN Frequency Measurements
- Resolution: 0.1mV The "MAX" displays the maximum value of measurements. The "MIN" displays 1. Set the Function/Range switch to the “Hz” position.
- Overload protection: 1000VDC or 750VAC rms measurement, press MAX/MIN button for more than 2 seconds to exit. 3. Connect the test leads to the point of measurement and read the frequency
- ±(2.0% rdg + 8 dgts) on 750V range again to exit the relative mode.
- Input impedance: 660mV: >100MΩ; 6.6V: 10MΩ; 66V ~ 750V: 9.1MΩ
- Overload protection: 1000VDC or 750VAC rms
- Ranges: 660uA, 6600uA, 66mA, 400mA, 10A Manually Selecting Range
- Resolution: 0.1uA The meter also has a manual range mode. In manual range, you select and lock MAINTENANCE
- ±(3.5% rdg + 10 dgts) on 10A range
- 2V on 6600uA, 400mA ranges jack. Battery Replacement
- mats, or any approved insulating material. Accuracy: 2.Set the Function/Range switch to the DC or AC ranges. and lift off the front case. Replace F1 only with the original type 0.5A/500V, fast
- ±(1.2% rdg + 5dgts) on 660Ω to 660kΩ ranges 3.Remove power from the circuit under test and open the normal circuit path acting ceramic fuse, 6.35x32mm Replace F2 only with the original type
- Open circuit volts: -0.45Vdc (-1.2Vdc on 660Ω range) 4. Apply power and read the value from the display. Cleaning
- When using the probes, keep your fingers behind the finger guards on the Ranges: 6.6nF, 66nF, 660nF, 6.6uF, 66uF, 660uF, 6.6mF, 66mF 2.Reove power from the equipment under test.
- Ranges: 660Hz, 6.6k, 66k, 660k, 6.6M, 66MHz
- Resolution: 0.1Hz
- Accuracy: ±(0.1% rdg + 3 dgts)
- Minimum pulse width: > 25ns Alternating current
- Duty cycle limits: > 30% and < 70% Direct current
- Overload protection: 500VDC or AC rms
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
2709B
디지털 멀티미터
2709B Auto Ranging True RMS Tool Kit® DMM
2709B 2709B BK BK 2709B 2709B B&K B&K 2709B 2709B 비케이 비케이 2709B 2709B 비앤케이 비앤케이 2709B 2709B비엔케이 비엔케이 2709B
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 2709B 제품 데이터시트의 핵심 사양입니다.
- Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 6600. Test current: 1.2mA (approximate) Continuity Measurements
- Measurement rate: 2 times per second, nominal.
- Auto power off: Approx. 30 minutes. CONTINUITY Capacitance Measurements
- Operating environment: 0℃ to 50℃ at < 70% relative humidity. Audible indication: Less than 30Ω 1. Set the Function/Range switch to the desired capacitance range.
- Storage temperature: -20℃ to 60℃, 0 to 80% relative humidity. Response time: 100ms 2.Connect the red test lead to the “uA mA” jack and the black test lead to the
- Accuracy: Stated accuracy at 23℃ ±5℃, < 75% relative humidity. Overload protection: 500VDC or AC rms “COM “jack.
- Temperature Coefficient: 0.1 x (specified accuracy) per ℃. (℃ to 18℃, 28℃ to 3.Touch the probes to the capacitor. Observe polarity when measuring polarized
- Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
- Dimensions: 165mm (H) x78mm (W) x42.5mm (D).
- Weight: Approx. 10.0 oz. (285g) including holster.
- Ranges: 660mV, 6.6V, 66V, 660V, 1000V MAX / MIN Frequency Measurements
- Resolution: 0.1mV The "MAX" displays the maximum value of measurements. The "MIN" displays 1. Set the Function/Range switch to the “Hz” position.
- Overload protection: 1000VDC or 750VAC rms measurement, press MAX/MIN button for more than 2 seconds to exit. 3. Connect the test leads to the point of measurement and read the frequency
- ±(2.0% rdg + 8 dgts) on 750V range again to exit the relative mode.
- Input impedance: 660mV: >100MΩ; 6.6V: 10MΩ; 66V ~ 750V: 9.1MΩ
- Overload protection: 1000VDC or 750VAC rms
- Ranges: 660uA, 6600uA, 66mA, 400mA, 10A Manually Selecting Range
- Resolution: 0.1uA The meter also has a manual range mode. In manual range, you select and lock MAINTENANCE
- ±(3.5% rdg + 10 dgts) on 10A range
- 2V on 6600uA, 400mA ranges jack. Battery Replacement
- mats, or any approved insulating material. Accuracy: 2.Set the Function/Range switch to the DC or AC ranges. and lift off the front case. Replace F1 only with the original type 0.5A/500V, fast
- ±(1.2% rdg + 5dgts) on 660Ω to 660kΩ ranges 3.Remove power from the circuit under test and open the normal circuit path acting ceramic fuse, 6.35x32mm Replace F2 only with the original type
- Open circuit volts: -0.45Vdc (-1.2Vdc on 660Ω range) 4. Apply power and read the value from the display. Cleaning
- When using the probes, keep your fingers behind the finger guards on the Ranges: 6.6nF, 66nF, 660nF, 6.6uF, 66uF, 660uF, 6.6mF, 66mF 2.Reove power from the equipment under test.
- Ranges: 660Hz, 6.6k, 66k, 660k, 6.6M, 66MHz
- Resolution: 0.1Hz
- Accuracy: ±(0.1% rdg + 3 dgts)
- Minimum pulse width: > 25ns Alternating current
- Duty cycle limits: > 30% and < 70% Direct current
- Overload protection: 500VDC or AC rms
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
