문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
4010A
신호발생기
4010A Function Generators
4010A 4010A BK BK 4010A 4010A B&K B&K 4010A 4010A비케이 비케이 4010A 4010A비앤케이 비앤케이 4010A 4010A비엔케이 비엔케이 4010A 4011A 4011A BK BK 4011A 4011A B&K B&K 4011A 4011A 비케이 비케이4011A 비앤케이 4011A 4011A비앤케이 4011A 비엔케이 비엔케이 4011A
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 4010A 제품 데이터시트의 핵심 사양입니다.
- or triangle waves over the 0.5Hz to 5MHz range. This
- 0.5 Hz to 5MHz in 7 ranges
- Va riable, 20dB range typical ≥98% to 100kHz
- Rise Time ≤20nS Display
- Max Frequency 2MHz 120 / 230VAC ±10%, 50 / 60Hz, internal jumper
- Rise Time ≤120nS DIMENSIONS (H x W x D)
- 0 - 10V ±1V causes a 100:1 frequency change (Typical)
- Time Base Accuracy ±1 count
- 1. POWER Switch. Turns power on and off. 7. TTL/CMOS Jack. TTL or CMOS square wave,
- 2. RANGE Switch. Selects output frequency range. Seven depending on the position of the CMOS LEVEL
- ranges from 5Hz to 5MHz. Switch indicates maximum switch (13) is output at this jack. This output is
- FREQUENCY control to 0.1 times the maximum. For OFFSET controls.
- example, if the 500kHz range is selected, the output 8. CMOS LEVEL Control. Rotating this control
- frequency can be adjusted from 50kHz to 500kHz. clockwise increases the amplitude of the CMOS
- waveform at OUTPUT jack. 9. VCG Jack. Voltage Controlled Generator input.
- 4. OUTPUT LEVEL Control. Controls the amplitude of the Permits external control of generator output
- by approximately 20 dB with this control. positive voltage will decrease frequency.
- direction. OUTPUT jack is attenuated by 20dB.
- 13. CMOS LEVEL Switch. When engaged, changes 17. COUNTER DISPLAY. Displays frequency of internally
- adjustment of the output frequency from 0.1 to 1
- engaging the POWER switch (1).
- Figure 2. Output Waveform and Phase Relationship
- LED display. varies the amplitude from maximum to 20dB below
- output frequency to the approximate desired value. The FINE available by pushing in the -20dB switch (11). The
- at the OUTPUT jack (6). In addition, a digital signal, either TTL
- into 50Ω. The DC Offset does not affect the TTL/CMOS output
- 1. l. Counterclockwise rotation of the COARSE frequency control
- maximum for the range selected (10:1). For example, if the 50K
- 3. The FINE frequency control provides approximately ±5%
- 5. When outputting square waves or when using the TTL output, operating conditions encountered when using the DC
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
4010A
신호발생기
4010A Function Generators
4010A 4010A BK BK 4010A 4010A B&K B&K 4010A 4010A비케이 비케이 4010A 4010A비앤케이 비앤케이 4010A 4010A비엔케이 비엔케이 4010A 4011A 4011A BK BK 4011A 4011A B&K B&K 4011A 4011A 비케이 비케이4011A 비앤케이 4011A 4011A비앤케이 4011A 비엔케이 비엔케이 4011A
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 4010A 제품 데이터시트의 핵심 사양입니다.
- or triangle waves over the 0.5Hz to 5MHz range. This
- 0.5 Hz to 5MHz in 7 ranges
- Va riable, 20dB range typical ≥98% to 100kHz
- Rise Time ≤20nS Display
- Max Frequency 2MHz 120 / 230VAC ±10%, 50 / 60Hz, internal jumper
- Rise Time ≤120nS DIMENSIONS (H x W x D)
- 0 - 10V ±1V causes a 100:1 frequency change (Typical)
- Time Base Accuracy ±1 count
- 1. POWER Switch. Turns power on and off. 7. TTL/CMOS Jack. TTL or CMOS square wave,
- 2. RANGE Switch. Selects output frequency range. Seven depending on the position of the CMOS LEVEL
- ranges from 5Hz to 5MHz. Switch indicates maximum switch (13) is output at this jack. This output is
- FREQUENCY control to 0.1 times the maximum. For OFFSET controls.
- example, if the 500kHz range is selected, the output 8. CMOS LEVEL Control. Rotating this control
- frequency can be adjusted from 50kHz to 500kHz. clockwise increases the amplitude of the CMOS
- waveform at OUTPUT jack. 9. VCG Jack. Voltage Controlled Generator input.
- 4. OUTPUT LEVEL Control. Controls the amplitude of the Permits external control of generator output
- by approximately 20 dB with this control. positive voltage will decrease frequency.
- direction. OUTPUT jack is attenuated by 20dB.
- 13. CMOS LEVEL Switch. When engaged, changes 17. COUNTER DISPLAY. Displays frequency of internally
- adjustment of the output frequency from 0.1 to 1
- engaging the POWER switch (1).
- Figure 2. Output Waveform and Phase Relationship
- LED display. varies the amplitude from maximum to 20dB below
- output frequency to the approximate desired value. The FINE available by pushing in the -20dB switch (11). The
- at the OUTPUT jack (6). In addition, a digital signal, either TTL
- into 50Ω. The DC Offset does not affect the TTL/CMOS output
- 1. l. Counterclockwise rotation of the COARSE frequency control
- maximum for the range selected (10:1). For example, if the 50K
- 3. The FINE frequency control provides approximately ±5%
- 5. When outputting square waves or when using the TTL output, operating conditions encountered when using the DC
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
