문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
1803D
주파수카운터
1803D 200 MHz Frequency Counter
1803D 1803D BK BK 1803D 1803D B&K B&K 1803D 1803D 비케이 비케이 1803D 1803D 비앤케이 비앤케이 1803D 1803D 비엔케이 비엔케이 1803D
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 1803D 제품 데이터시트의 핵심 사양입니다.
- 200 MHz FREQUENCY
- defective equipment. Do not float the power supply output to more than 100 volts peak with respect to chassis or earth ground.
- 3. Don’t expose high voltage needlessly. Remove housings and covers only when necessary. Turn off equipment while making test
- Gate Times 1.0 sec and 0.1 sec gates. IMPEDANCE HF 1MΩ
- Displayz 7 digits VHF 50Ω
- FREQUENCY CHARACTERISTICS Coupling D6
- Range: HF 10Hz to 25MHz
- Maximum Input 3V
- 1.0 Sec Gate ± Time base accuracy, ± 1 TIME BASE CHARACTERISTICS
- 0.1 Sec Gate ± Time base accuracy, ± 2 Frequency 5.24288MHz
- Resolution: Temperature Stability <0.001%(10ppm),0-
- Display: ............................. 0.43"LEDs
- Overflow Indicator: ............ OVERflow indicator (top left corner of display) lights when count exceeds 199.9999 counts.
- Display Update Time: ......... . 1.0 Sec Gate: 2.0 seconds. 0.1 Sec Gate: 0.2 seconds
- Dimensions (HxWxD) ------------------ -- 2.1" X 9.06" X 6.18"(54 X 230 X 157mm)
- Weight ------------------------------------- -- 0.8Kgs (1.761 (lbs)
- 1. Input Jack. Input jack for 10Hz to 200MHz frequency measurements.
- 2. Display. Seven digit display used for all frequency readings.
- 3. OVERfIow Indicator. Lights whenever range of display is exceeded (199.99999MHz). Most significant digit is not displayed.
- 4. Frequency Function Switch.: Selects VHF and HF frequency range at input jack.
- 6. POWER Switch: Turns power ON and OFF.
- a. Use 0.1S for faster measurement of high frequency automatically positioned.
- signals. The update time of the display is every 0.2 a. With a 1.0S gate time, readings below 1MHz are given in decimal
- second. Resolution is 10Hz. MHz, above MHz, they are in whole megahertz. For example,
- 12KHz is displayed as.012000, and 12MHz is 12.000000.
- the input jack. and resetting, for a total of 2 seconds between display updated when 1.0S
- 6. The OVER flow indicator lights whenever the range of the display
- use a 50 ohm cable and terminate with a 50 ohm resistive load. Both
- 4. If possible, familiarize yourself with the equipment being tested and the location of its high voltage points. However, remember that
- 5. Use an insulated floor material or a large, insulated floor mat to stand on, and an insulated work surface on which to place
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
비케이 ・ BK PRECISION
1803D
주파수카운터
1803D 200 MHz Frequency Counter
1803D 1803D BK BK 1803D 1803D B&K B&K 1803D 1803D 비케이 비케이 1803D 1803D 비앤케이 비앤케이 1803D 1803D 비엔케이 비엔케이 1803D
📄 기술자료 다운로드
■ 제품 사양 (Specifications)
BK 1803D 제품 데이터시트의 핵심 사양입니다.
- 200 MHz FREQUENCY
- defective equipment. Do not float the power supply output to more than 100 volts peak with respect to chassis or earth ground.
- 3. Don’t expose high voltage needlessly. Remove housings and covers only when necessary. Turn off equipment while making test
- Gate Times 1.0 sec and 0.1 sec gates. IMPEDANCE HF 1MΩ
- Displayz 7 digits VHF 50Ω
- FREQUENCY CHARACTERISTICS Coupling D6
- Range: HF 10Hz to 25MHz
- Maximum Input 3V
- 1.0 Sec Gate ± Time base accuracy, ± 1 TIME BASE CHARACTERISTICS
- 0.1 Sec Gate ± Time base accuracy, ± 2 Frequency 5.24288MHz
- Resolution: Temperature Stability <0.001%(10ppm),0-
- Display: ............................. 0.43"LEDs
- Overflow Indicator: ............ OVERflow indicator (top left corner of display) lights when count exceeds 199.9999 counts.
- Display Update Time: ......... . 1.0 Sec Gate: 2.0 seconds. 0.1 Sec Gate: 0.2 seconds
- Dimensions (HxWxD) ------------------ -- 2.1" X 9.06" X 6.18"(54 X 230 X 157mm)
- Weight ------------------------------------- -- 0.8Kgs (1.761 (lbs)
- 1. Input Jack. Input jack for 10Hz to 200MHz frequency measurements.
- 2. Display. Seven digit display used for all frequency readings.
- 3. OVERfIow Indicator. Lights whenever range of display is exceeded (199.99999MHz). Most significant digit is not displayed.
- 4. Frequency Function Switch.: Selects VHF and HF frequency range at input jack.
- 6. POWER Switch: Turns power ON and OFF.
- a. Use 0.1S for faster measurement of high frequency automatically positioned.
- signals. The update time of the display is every 0.2 a. With a 1.0S gate time, readings below 1MHz are given in decimal
- second. Resolution is 10Hz. MHz, above MHz, they are in whole megahertz. For example,
- 12KHz is displayed as.012000, and 12MHz is 12.000000.
- the input jack. and resetting, for a total of 2 seconds between display updated when 1.0S
- 6. The OVER flow indicator lights whenever the range of the display
- use a 50 ohm cable and terminate with a 50 ohm resistive load. Both
- 4. If possible, familiarize yourself with the equipment being tested and the location of its high voltage points. However, remember that
- 5. Use an insulated floor material or a large, insulated floor mat to stand on, and an insulated work surface on which to place
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
