문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
키사이트 ・ KEYSIGHT
N8480 시리즈
파워센서
N8480 Series Power Sensors
HIGHLIGHTS
- EEPROM to store cal factors eliminates manual entry
- Wide frequency range from 100 kHz to 6 GHz
- Wide dynamic range from -15 dBm to +35 dBm
- Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability
- Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters
Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set.
N8482H N8482H KEYSIGHT KEYSIGHT N8482H N8482H 키사이트 키사이트 N8482H
N8480 모델 차이 정리
주요 사양
상품 원문에 기재된 출력 신호 관련 항목입니다.
- All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. — 사용 조건과 대조해 확인
- Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability — 사용 조건과 대조해 확인
- Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. — 사용 조건과 대조해 확인
구매 전 확인사항
설치 환경(공간·전원·배선)을 먼저 확인하세요.
N8480 설치 환경(온도·공간·배선)을 알려주시면 적용 가능 여부를 확인해 드립니다.
■ 제품 사양 (Specifications)
KEYSIGHT N8480 제품 데이터시트의 핵심 사양입니다.
- of +20dBm, fast measurement speed/settling time as well as ease of maintenance.
- measurement standard for RF power in coaxial sensors available in Type-N and 2.4mm connector styles.
- Figure 1. Measurement setup of the new balance thermocouple power sensors
- N8480S Series Balance Thermocouple Power Sensors
- Frequency range DC to 18 GHz DC to 50 GHz
- Power range -35 to +20 dBm -35 to +20 dBm
- Connector type N-Type (male) 2.4 mm (male)
- CW Signal: 316 mW / +25 dBm (50 Ohm impedance)
- Modulated Pulse Signal: 15 W / +42 dBm (2 us)
- Maximum input DC power 316 mW / +25dBm
- Typical load resistance Measured at Coaxial connector 50.9 50.7
- DC heater resistance Measured at DC connector 50.1 96.6
- RF connector at 25 °C 1070 1080
- DC connector at 25 °C 1050 2070
- Frequency SWR SWR (0 to +55 °C)
- Figure 2. Typical SWR for N8481S power sensor
- Figure 3. Typical SWR for N8487S power sensor
- Temperature 0 to +55 °C
- Humidity Maximum 95% RH up to 40 °C (non-condensing)
- Temperature -40 to +70 °C
- Humidity Up to 90% RH at 65 °C (non-condensing)
- Figure 4. N8481S power sensor dimension
- Figure 5. N8487S power sensor dimension
- Keysight introduce the new N8480SBSA Balance Thermocouple Power Sensor Software Application that
- migration of legacy thermistor mount power sensors (478A/8478B) and the adoption of the new balance
- thermocouple power sensors (N8481/87S).
- Interfaces USB, GPIB, LAN, RS-232
- Display resolution 1920 x 1200 with scaling set to 100% (recommended)
- U2071A Power sensor cable 5 ft (1.5m)
- U2071B Power sensor cable 10 ft (3m)
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
키사이트 ・ KEYSIGHT
N8480 시리즈
파워센서
N8480 Series Power Sensors
HIGHLIGHTS
- EEPROM to store cal factors eliminates manual entry
- Wide frequency range from 100 kHz to 6 GHz
- Wide dynamic range from -15 dBm to +35 dBm
- Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability
- Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available as a replacement of legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14A, E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A) power meters
Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set.
N8482H N8482H KEYSIGHT KEYSIGHT N8482H N8482H 키사이트 키사이트 N8482H
N8480 모델 차이 정리
주요 사양
상품 원문에 기재된 출력 신호 관련 항목입니다.
- All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. — 사용 조건과 대조해 확인
- Best-in-class power linearity of less than 1%, excellent SWR of mismatch uncertainty and highly accurate power repeatability — 사용 조건과 대조해 확인
- Note: All N8480 series power sensors are not compatible with the Keysight 43x, E1416A, N8262A power meters, 5314x microwave counters and E7495x base station test set. — 사용 조건과 대조해 확인
구매 전 확인사항
설치 환경(공간·전원·배선)을 먼저 확인하세요.
N8480 설치 환경(온도·공간·배선)을 알려주시면 적용 가능 여부를 확인해 드립니다.
■ 제품 사양 (Specifications)
KEYSIGHT N8480 제품 데이터시트의 핵심 사양입니다.
- of +20dBm, fast measurement speed/settling time as well as ease of maintenance.
- measurement standard for RF power in coaxial sensors available in Type-N and 2.4mm connector styles.
- Figure 1. Measurement setup of the new balance thermocouple power sensors
- N8480S Series Balance Thermocouple Power Sensors
- Frequency range DC to 18 GHz DC to 50 GHz
- Power range -35 to +20 dBm -35 to +20 dBm
- Connector type N-Type (male) 2.4 mm (male)
- CW Signal: 316 mW / +25 dBm (50 Ohm impedance)
- Modulated Pulse Signal: 15 W / +42 dBm (2 us)
- Maximum input DC power 316 mW / +25dBm
- Typical load resistance Measured at Coaxial connector 50.9 50.7
- DC heater resistance Measured at DC connector 50.1 96.6
- RF connector at 25 °C 1070 1080
- DC connector at 25 °C 1050 2070
- Frequency SWR SWR (0 to +55 °C)
- Figure 2. Typical SWR for N8481S power sensor
- Figure 3. Typical SWR for N8487S power sensor
- Temperature 0 to +55 °C
- Humidity Maximum 95% RH up to 40 °C (non-condensing)
- Temperature -40 to +70 °C
- Humidity Up to 90% RH at 65 °C (non-condensing)
- Figure 4. N8481S power sensor dimension
- Figure 5. N8487S power sensor dimension
- Keysight introduce the new N8480SBSA Balance Thermocouple Power Sensor Software Application that
- migration of legacy thermistor mount power sensors (478A/8478B) and the adoption of the new balance
- thermocouple power sensors (N8481/87S).
- Interfaces USB, GPIB, LAN, RS-232
- Display resolution 1920 x 1200 with scaling set to 100% (recommended)
- U2071A Power sensor cable 5 ft (1.5m)
- U2071B Power sensor cable 10 ft (3m)
본 사양은 제조사 공식 데이터시트의 핵심 항목을 정리한 것입니다. 전체 원문은 Lab 게시판 데이터시트를 참고하시고, 정확한 견적·재고는 굿맨시스템으로 문의 바랍니다.
문의 010 7574 9841
평일 오전9시 ~ 오후6시 입니다. (공휴일은 통화불가합니다)
부재중일시 전화나 카톡 남겨주시면 업무시간때 체크후 피드백 드리겠습니다.
